Table 26: global policy parameters: localization, Table 27: global policy parameters: phone settings, Figure 63: global policy categories – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 96
Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 95 of 303
Figure 63: Global Policy Categories
The following tables list the Global Policy configuration parameters for the SIP end device.
Table 26: Global Policy Parameters: Localization
Language settings
Language
Select the LCD display language on the SIP end device.
Date and Time
Date Format
Configure the date display format on the SIP end device’s LCD.
Time Format
Configure the time display in 12-hour or 24-hour format on the SIP end
device’s LCD.
NTP Server
Configure the URL or IP address of the NTP server. The SIP end device
may obtain the date and time from the server.
Time Zone
Configure the time zone used on the SIP end device.
Table 27: Global Policy Parameters: Phone Settings
Default Call Settings
Dial Plan
Configure the default dial plan rule. For syntax and examples, please
refer to user manual of the SIP devices to be provisioned for more details.
Enable Call Features
When enabled, “Do Not Disturb”, “Call Forward” and other call features
can be used via the local feature code on the phone. Otherwise, the ITSP
feature code will be used.
Use # as Dial Key
If set to “Yes”, pressing the number key “#” will immediately dial out the
input digits.