beautypg.com

Grandstream UCM6100 User Manual for 1.0.9.25 User Manual

Page 237

background image

Firmware Version 1.0.9.25

UCM6100 Series IP PBX User Manual

Page 236 of 303

1. Group Name

Enter the Group Name. This is to identify the Dial By Name group. The Dial By Name group can be

used as the destination for inbound route and key pressing event for IVR. The group name defined

here will show up in the destination list when configuring IVR and inbound route. If Dial By Name is set

as a key pressing event for IVR, user could use ‘*’ to exit from Dial By Name, then re-enter IVR and

start a new event. The following example shows how to use this option.

Figure 137: Dial By Name Group In IVR Key Pressing Events

This manual is related to the following products: