Grandstream UCM6100 User Manual for 1.0.9.25 - Manual (Page 273)

Firmware Version 1.0.9.25 UCM6100 Series IP PBX User Manual Page 272 of 303
FXS/FXO not configured.
FXS/FXO disconnected.
Other operations are also available in interface status section:
• Click on "Interfaces Status", the web page will redirect to ports configuration page which can also be
accessed via web GUI->PBX->Internal Options->Ports Config.
• Click on
to refresh the interface status.
• Click on [ + ] to expand the interface details.
• Click on [ - ] to hide the interface details.
PARKING LOT
The UCM6100 supports call park using feature code. When there is call being parked, this section will
display the parking lot status.
Figure 154: Parking Lot Status
Table 95: Parking Lot Status
Caller ID Display the caller ID who parks the call.
Channel Display channel for the call park.
Extension Display the parking lot number where the call is parked/retrieved.
Timeout
Display timeout (in seconds) for the parked call. The status page will
dynamically update this timer from 120 seconds (default) to 0. When the timer
reaches 0, the caller who parks the call will be called back.
Other operations are also available in parking lot status section:
• Click on "Parking Lot", the web page will redirect to feature codes page which can also be accessed
via web GUI->PBX->Internal Options->Feature Codes.
• Click on
to refresh the parking lot status.
• Click on [ + ] to expand the parking lot details.