Grandstream UCM6100 User Manual for 1.0.9.25 - Manual (Page 245)

Firmware Version 1.0.9.25 UCM6100 Series IP PBX User Manual Page 244 of 303
Call Park
• Default code: #72.
• Enter the code during active call to park the call.
• Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Audio Mix Record
• Default code: *3.
• Enter the code followed by # or SEND to start recording the
audio call and the UCM6100 will mix the streams natively on
the fly as the call is in progress.
• Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
DND/Call Forward
Do Not Disturb (DND) Activate • Default code: *77.
Do Not Disturb (DND) Deactivate • Default code: *78.
Call Forward Busy Activate
• Default Code: *90.
• Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Busy Deactivate
• Default Code: *91.
Call Forward No Answer Activate
• Default Code: *92.
• Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward No Answer
Deactivate
• Default Code: *93.
Call Forward Unconditional
Activate
• Default Code: *72.
• Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Unconditional
Deactivate
• Default Code: *73.
Feature Misc