Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 122
Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 121 of 303
characters, letters, digits and _.
Last Name
Configure the last name of the user. The last name can contain
characters, letters, digits and _.
Email Address
Fill in the Email address for the user. Voicemail will be sent to this Email
address.
User Password
Configure the password for user portal access. A random numeric
password is automatically generated. It is recommended to use the
randomly generated password for security purpose.
Language
Select the voice prompt language to be used for this extension. The
default setting is "Default" which is the selected voice prompt language
under web GUI->PBX->Internal Options->Language. The dropdown list
shows all the current available voice prompt languages on the UCM6100.
To add more languages in the list, please download voice prompt
package by selecting "Check Prompt List" under web UI->PBX->Internal
Options->Language.
Music On Hold
Select which Music On Hold class to suggest to extension when putting
the active call on hold.
Table 35: SIP Extension Configuration Parameters - Media
SIP Settings
NAT
Use NAT when the UCM6100 is on a public IP communicating with
devices hidden behind NAT (e.g., broadband router). If there is one-way
audio issue, usually it's related to NAT configuration or Firewall's support
of SIP and RTP ports. The default setting is enabled.
Can Reinvite
By default, the UCM6100 will route the media steams from SIP endpoints
through itself. If enabled, the PBX will attempt to negotiate with the
endpoints to route the media stream directly. It is not always possible for
the UCM6100 to negotiate endpoint-to-endpoint media routing. The
default setting is "No".
DTMF Mode
Select DTMF mode for the user to send DTMF. The default setting is
"RFC2833". If "Info" is selected, SIP INFO message will be used. If
"Inband" is selected, 64-kbit PCMU and PCMA are required. When "Auto"
is selected, RFC2833 will be used if offered, otherwise "Inband" will be
used.
Insecure
• Port: Allow peers matching by IP address without matching port
number.
• Very: Allow peers matching by IP address without matching port
number. Also, authentication of incoming INVITE messages is not
required.