Firmware version 1.0.7.11, Firmware version 1.0.6.11, Firmware version 1.0.6.10 – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 20
Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 19 of 303
• Updated maximum length of web UI login password to 30 characters. [CHANGE PASSWORD]
• Added Fax gateway support for Fax mode on FXS and FXO port. [Table 43: FXS Extension
Configuration Parameters - Media] [Table 48: Analog Trunk Configuration Parameters]
• Added “NAT” option and “Send PPI Header” option in SIP register trunk configuration. [Table 51:
SIP Register Trunk Configuration Parameters]
• Added REC API (access for call recording files). [API CONFIGURATION]
• Added “Synchronize All Data” option in Data Sync. [DATA SYNC]
• Added “Delect Selected Sound Files” option for Music On Hold files. [MUSIC ON HOLD]
FIRMWARE VERSION 1.0.7.11
• Added office time and holiday setting. [OFFICE TIME] [HOLIDAY]
• Added new architecture for auto provisioning via Zero Config. [PROVISIONING]
• Added Alert-info configuration for distinctive ringing on inbound route. [Table 58: Inbound Rule
• Added SLA support to monitor FXO trunk. [SLA STATION]
• Added Follow Me support. [FOLLOW ME]
• Added One-Key Dial support. [ONE-KEY DIAL]
• Added FXO Dial Delay option for analog trunk. [Table 48: Analog Trunk Configuration Parameters]
• Added Music On Hold selection per extension. [EXTENSIONS]
• Added Call Forward Time Condition per extension. [EXTENSIONS]
• Added custom prompt support for ring group announcement. [Table 66: Ring Group Parameters]
• Added custom prompt support for paging/intercom group announcement. [Table 67:
Paging/Intercom Group Configuration Parameters]
• Added options to delete voicemail and Fax files via cleaner. [CLEANER]
• Added DTMF configuration per trunk. [VOIP TRUNKS]
• Added call queue Music On Hold customization. [Table 68: Call Queue Configuration Parameters]
• Added call queue destination support. [Table 68: Call Queue Configuration Parameters]
• Added batch add blacklist file support. [BLACKLIST CONFIGURATIONS]
FIRMWARE VERSION 1.0.6.11
• Added service check options under web UI->Maintenance->Troubleshooting->Service Check
page to regularly check Asterisk service.
FIRMWARE VERSION 1.0.6.10
• Added static routes function. [STATIC ROUTES]