Login timeout settings, Figure 57: login timeout settings – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 89
Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 88 of 303
On the UCM6100, recording files are generated and exist in 3 categories: normal call recording files,
conference recording files, and call queue recording files. Therefore users have the following options
when select the categories to copy the files to the external device:
-
Recording Files: Copy the normal recording files to the external device.
-
Conference: Copy the conference recording files to the external device.
-
Queue: Copy the call queue recording files to the external device.
-
All: Copy all recording files to the external device.
LOGIN TIMEOUT SETTINGS
After the user logs in the UCM6100 web UI, the user will be automatically logged out after certain timeout.
This timeout value can be specified under UCM100 web GUI->Settings->Login Timeout Settings page.
The “User Login Timeout” value is in minute and the default setting is 10 minutes. If the user doesn’t make
any operation on web UI within the timeout, the user will be logged out automatically. After that, the web UI
will be redirected to the login page and the user will need to enter username and password to log in.
If set to 0, there is no timeout for the web UI login session and the user will not be automatically logged out.
Figure 57: Login Timeout Settings