Grandstream UCM6100 User Manual for 1.0.9.25 - Manual (Page 202)

Firmware Version 1.0.9.25 UCM6100 Series IP PBX User Manual Page 201 of 303
PAGING AND INTERCOM GROUP
Paging and Intercom Group can be used to make an announcement over the speaker on a group of
phones. Targeted phones will answer immediately using speaker. The UCM6100 paging and intercom can
be used via feature code to a single extension or a paging/intercom group. This sections describes the
configuration of paging/intercom group under Web GUI->PBX->Call Features->Paging/Intercom.
CONFIGURE PAGING/INTERCOM GROUP
• Click on "Create New Paging/Intercom Group" to add paging/intercom group.
Figure 116: Paging/Intercom Group
Table 67: Paging/Intercom Group Configuration Parameters
Name Configure paging/intercom group name.
Extension Configure the paging/intercom group extension.
Type Select "2-way Intercom" or "1-way Page".
Custom Prompt
This option is to set a custom prompt for a paging/intercom group to
announce to caller. Click on ‘Prompt’, it will direct to the page
PBX->Internal Options->Custom Prompt, where users could record
new prompt or upload prompt files.
Page/Intercom Group
Members
Select available users from the left side to the paging/intercom group
member list on the right.