Figure 55: recordings storage prompt information, Figure 56: recording storage category – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 88
Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 87 of 303
• If “Enable Auto Change” is selected, the recording files will be automatically saved in the available
USB Disk or SD card plugged into the UCM6100. If both USB Disk and SD card are plugged in, the
recording files will be always saved in the USB Disk.
• If “Local” is selected, the recordings will be stored in UCM6100 internal storage.
• If “USB Disk” or “SD Card” is selected, the recordings will be stored in the corresponding plugged in
external storage device. Please note the options “USB Disk” and “SD Card” will be displayed only if
they are plugged into the UCM6100.
Once “USB Disk” or “SD Card” is selected, click on “OK”. The user will be prompted to confirm to copy
the local files to the external storage device.
Figure 55: Recordings Storage Prompt Information
Click on “OK” to continue. The users will be prompted a new dialog to select the categories for the files
to be copied over.
Figure 56: Recording Storage Category