Manage devices, Figure 68: create new device, Figure 69: manage devices – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 109
Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 108 of 303
Figure 68: Create New Device
MANAGE DEVICES
The device manually created or discovered from Auto Discover will be listed in the web UI->PBX->Zero
Config->Zero Config page. Users can see the devices with their MAC address, IP address, vendor,
model and etc.
Figure 69: Manage Devices
• Click on
to access the web UI of the phone.
• Click on
to edit the device configuration.
A new dialog will be displayed for the users to configure “Basic” settings and “Advanced” settings.
“Basic” settings have the same configurations as displayed when manually creating a new device, i.e.,
account, line key and MPK settings; “Advanced” settings allow users to configure more details in a
five-level structure.