beautypg.com

Create new fxs extension – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual

Page 130

background image

Firmware Version 1.0.9.25

UCM6100 Series IP PBX User Manual

Page 129 of 303

number.

External Number

Set the external number to be rang simultaneously. ‘-’ is the connection

character which will be ignored.

Time Condition for Ring

Simultaneously

Ring the external number simultaneously along with the extension on the

basis of this time condition.

Other Settings

Ring Timeout

Configure the number of seconds to ring the user before the call is

forwarded to voicemail (voicemail is enabled) or hang up (voicemail is

disabled). If not specified, the default ring timeout is 60 seconds on the

UCM6100, which can be configured in the global ring timeout setting

under web GUI->Internal Options->IVR Prompt: General Preference. The

valid range is between 5 seconds and 600 seconds.

Note:

If the end point also has a ring timeout configured, the actual ring timeout

used is the shortest time set by either device.

Auto Record

Enable automatic recording for the calls using this extension. The default

setting is disabled. The recording files can be accessed under web

GUI->CDR->Recording Files.

Skip Trunk Auth

• If set to “Yes”, users can skip entering the password when making

outbound calls.

• If set to “By Time”, users can skip entering the password when

making outbound calls during the selected time condition.

• If set to “No”, users will be asked to enter the password when making

outbound calls.

Time Condition for Skip Trunk

Auth

If “Skip Trunk Auth” is set to “By Time”, select a time condition during

which users can skip entering password when making outbound calls.

Dial Trunk Password

Configure personal password when making outbound calls via trunk.

Table 41: IAX Extension Configuration Parameters - Specific Time

Specific Time

Time Condition

Click to add Time Condition to configure specific time for this extension.

CREATE NEW FXS EXTENSION

The UCM6100 supports Foreign eXchange Subscriber (FXS) interface. FXS is used when user needs to

connect analog phone lines or FAX machines to the UCM6100.

This manual is related to the following products: