beautypg.com

Grandstream UCM6100 User Manual for 1.0.9.25 User Manual

Page 134

background image

Firmware Version 1.0.9.25

UCM6100 Series IP PBX User Manual

Page 133 of 303

the Call Forward No Answer feature is deactivated. The default setting is

deactivated.

CFN Time Condition

Select time condition for Call Forward No Answer. The available time

condition are “Office Time”, “Out of Office Time”, “Holiday”, “Out of

Holiday”, “Out of Office Time or Holiday” and “Specific”.

Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in

terms of time period.

• Specific time can be configured on the bottom of the extension

configuration dialog. Scroll down the add Time Condition for specific

time.

• Office Time and Holiday could be configured on page Settings->Time

Settings->Office Time/Holiday page.

Call Forward Busy

Configure the Call Forward Busy target number. If not configured, the Call

Forward Busy feature is deactivated. The default setting is deactivated.

CFB Time Condition

Select time condition for Call Forward Busy. The available time condition

are “Office Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of

Office Time or Holiday” and “Specific”.

Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in

terms of time period.

• Specific time can be configured on the bottom of the extension

configuration dialog. Scroll down the add Time Condition for specific

time.

• Office Time and Holiday could be configured on page Settings->Time

Settings->Office Time/Holiday page.

CC Settings

Enable CC

If enabled, UCM6100 will automatically alert this extension when a called

party is available, given that a previous call to that party failed for some

reason.

Ring Simultaneously

Ring Simultaneously

Enable this option to have an external number ring simultaneously along

with the extension.

If a register trunk is used for outbound, the register number will be used to

be displayed for the external number as caller ID number.

External Number

Set the external number to be rang simultaneously. ‘-’ is the connection

character which will be ignored.

Time Condition for Ring

Simultaneously

Ring the external number simultaneously along with the extension on the

basis of this time condition.

This manual is related to the following products: