Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 277

Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 276 of 303
User Login Failed
SIP Internal Call Failure
SIP Outgoing Call through Trunk Failure
Fail2ban Blocking
SIP Lost Registration
SIP Peer Trunk Status
Click on
to configure the parameters for each event. See examples below.
1. Disk Usage.
Figure 157: System Events->Alert Events Lists: Disk Usage
• Detect Cycle: The UCM6100 will perform the internal disk usage detection based on this cycle.
Users can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the
cycle.
• Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6100
system will send the alert.
2. Memory Usage
Figure 158: System Events->Alert Events Lists: Memory Usage
• Detect Cycle: The UCM6100 will perform the memory usage detection based on this cycle. Users
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
• Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6100
system will send the alert.
3. System Reboot