beautypg.com

Grandstream UCM6100 User Manual for 1.0.9.25 User Manual

Page 100

background image

Firmware Version 1.0.9.25

UCM6100 Series IP PBX User Manual

Page 99 of 303

• Local UCM Server

Firmware can be uploaded to the UCM6100 internal storage for

firmware upgrade. If selected, click on “Manage Storage” icon next to

“Directory” option, upload firmware file and select directory for the

end device to retrieve the firmware file.

• Local USB Media

If selected, the USB storage device needs to be plugged into the

UCM6100 and the firmware file must be put under a folder named

“ZC_firmware” in the USB storage root directory.

• Local SD Card Media

If selected, an SD card needs to be plugged into the UCM6100 and

the firmware file must be put under a folder named “ZC_firmware” in

the USB storage root directory.

Upgrade via

When URL is selected as firmware source, configure upgrade via TFTP,

HTTP or HTTPS.

Server Path

When URL is selected as firmware source, configure the firmware

upgrading server path.

File Prefix

When URL is selected as firmware source, configure the firmware file

prefix. If configured, only the firmware with the matching encrypted prefix

will be downloaded and flashed into the phone, if URL is selected as

firmware source.

File Postfix

When URL is selected as firmware source, configure the firmware file

postfix. If configured, only the configuration file with the matching

encrypted postfix will be downloaded and flashed into the phone.

Allow DHCP Option 43/66

If DHCP option 43 or 66 is enabled on the LAN side, the TFTP server can

be redirected.

Automatic Upgrade

If enabled, the endpoint device will automatically upgrade if a new

firmware is detected. Users can select automatic upgrading by day, by

week or by minute.
• By week

Once selected, specify the day of the week to check HTTP/TFTP

server for firmware upgrades or configuration files changes.

• By day

Once selected, specify the hour of the day to check the HTTP/TFTP

server for firmware upgrades or configuration files changes.

• By minute

Once selected, specify the interval X that the SIP end device will

request for new firmware every X minutes.

Firmware Upgrade Rule

Specify how firmware upgrading and provisioning request to be sent.

This manual is related to the following products: