Grandstream UCM6100 User Manual for 1.0.9.25 - Manual (Page 232)

Firmware Version 1.0.9.25 UCM6100 Series IP PBX User Manual Page 231 of 303
BLF AND EVENT LIST
BLF
The UCM6100 supports BLF monitoring for extensions, ring group, call queue, conference room and
parking lot. For example, on the user's phone, configure the parking lot number 701 as the BLF monitored
number. When there is a parked call on 701, the LED for this BLF key will light up in red, meaning a call is
parked against this parking lot. Pressing this BLF key can pick up the call from this parking lot.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
On the Grandstream GXP series phones, the MPK supports "Call Park" mode, which can be used to park
the call by configuring the MPK number as call park feature code (e.g., 700). MPK "Call Park" mode can
also be used to monitor and pickup parked call if the MPK number is configured as parking lot (e.g., 701).
--------------------------------------------------------------------------------------------------------------------------------------------
EVENT LIST
Besides BLF, users can also configure the phones to monitor event list. In this way, both local extensions
on the same UCM6100 and remote extensions on the VOIP trunk can be monitored. The event list setting
is under web GUI->Call Features->Event List.
• Click on "Create New Event List" to add a new event list.
• Click on
to edit the event list configuration.
• Click on
to delete the event list.
Table 74: Event List Settings
URI
Configure the name of this event list (for example, office_event_list).
Please note the URI name cannot be the same as the extension name on
the UCM6100. The valid characters are letters, digits, _ and -.
Local Extensions
Select the available extensions/Extension Groups listed on the local
UCM6100 to be monitored in the event list.
Remote Extensions If LDAP sync is enabled between the UCM6100 and the peer UCM6100,