Figure 81: manage extensions – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 141
Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 140 of 303
"Edit”
, "Reboot"
and "Delete"
are available per extension. User can search an extension by
specifying the extension number to find an extension quickly.
Figure 81: Manage Extensions
• Status
Users can see the following icon for each extension to indicate the SIP status.
Green:
Free
Blue:
Ringing
Yellow:
In Use
Grey:
Unavailable (the extension is not registered or disabled on the PBX)
• Edit single extension
Click on
to start editing the extension parameters.
• Reboot the user
Click on
to send NOTIFY reboot event to the device which has an UCM6100 extension already
registered. To successfully reboot the user, "Zero Config" needs to be enabled on the UCM6100 web
GUI->PBX->Zero Config->Auto Provisioning Settings.
• Delete single extension
Click on
to delete the extension. Or select the checkbox of the extension and then click on "Delete
Selected Extensions".
• Modify selected extensions
Select the checkbox for the extension(s). Then click on "Modify Selected Extensions" to edit the
extensions in a batch.
• Delete selected extensions