Upgrading and maintenance, Upgrading, Upgrading via network – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 288: Table 101: network upgrade configuration, Figure 173: network upgrade
Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 287 of 303
UPGRADING AND MAINTENANCE
UPGRADING
The UCM6100 can be upgraded to a new firmware version remotely or locally. This section describes how
to upgrade your UCM6100 via network or local upload.
UPGRADING VIA NETWORK
The UCM6100 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP, HTTP or
HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com
The upgrading configuration can be accessed via Web GUI->Maintenance->Upgrade.
Figure 173: Network Upgrade
Table 101: Network Upgrade Configuration
Upgrade Via
Allow users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Firmware Server Path
Define the server path for the firmware server.
Firmware File Prefix
If configured, only the firmware with the matching encrypted prefix will be
downloaded and flashed into the UCM6100.