Grandstream UCM6100 User Manual for 1.0.9.25 - Manual (Page 168)

Firmware Version 1.0.9.25 UCM6100 Series IP PBX User Manual Page 167 of 303
Figure 94: Enable SLA Mode for Analog Trunk
Click on “Save”. The analog trunk will be listed with trunk mode “SLA”.
Figure 95: Analog Trunk with SLA Mode Enabled
2. On the UCM6100, go to web UI->Basic/Call Routes->SLA Station page, click on “Create New SLA
Station”. Please refer to section [CREATE/EDIT SLA STATION] for the configuration parameters. Users
can create one or more SLA stations to monitor the analog trunk. The following figure shows two
stations, 1002 and 1005, are configured to be associated with SLA trunk “fxo1”.
Figure 96: SLA Example - SLA Station