Figure 99: blacklist configuration parameters, Figure 100: blacklist csv file – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 176
Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 175 of 303
Figure 99: Blacklist Configuration Parameters
• To add blacklist number in batch, click on
to upload blacklist file in csv format. The supported csv
format is as below.
Figure 100: Blacklist csv File
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
Users could also add a number to the Blacklist or remove a number from the Blacklist by dialing the feature
code for "Blacklist Add' (default: *40) and "Blacklist Remove" (default: *41) from an extension. The feature
code can be configured under Web GUI->PBX->Internal Options->Feature Codes.
--------------------------------------------------------------------------------------------------------------------------------------------