Grandstream UCM6100 User Manual for 1.0.9.25 - Manual (Page 225)

Firmware Version 1.0.9.25 UCM6100 Series IP PBX User Manual Page 224 of 303
• Click on “Add Follow Me Number” to add local extensions or external numbers to be called after
ringing the extension selected in the first step.
• Once created, it will be displayed on the follow me web page list. Click on
to edit the Follow Me
configuration. Click on to delete the Follow Me.
The following table shows the Follow Me configuration parameters.
Table 70: Follow Me Settings
Enable Configure to enable or disable Follow Me for this user.
Skip Trunk Auth
If external number is added in the Follow Me, please make sure this
option is enabled or the “Skip Trunk Auth” option of the extension is
enabled, otherwise the external Follow Me number cannot be reached.
Music On Hold Class
Configure the Music On Hold class that the caller would hear while
tracking the user.
Confirm When Answering
By default it is enabled and user will be asked to press 1 to accept the call
or to press 2 to reject the call after answering a Follow Me call.
If it is disabled, the Follow Me call will be established once after the user
answers it.
Follow Me Numbers
The added numbers are listed here. Click on to arrange the
order. Click on to delete the number. Click on to add new
numbers.
New Follow Me Number
Add a new Follow Me number which could be a ‘Local Extension’ or
‘External Number’. The selected dial plan should have permissions to dial
the defined external number.
Dialing Order
Select the order in which the Follow Me destinations will be dialed to
reach the user: ring all at once or ring one after the other.
• Click on “Follow Me Options” to enable or disable the options listed in the following table.
Table 71: Follow Me Options
Playback Incoming Status
Message
If enabled, the PBX will playback the incoming status message before
starting the Follow Me steps.
Record the Caller’s Name
If enabled, the PBX will record the caller’s name from the phone so it can
be announced to the callee in each step.
Playback Unreachable Status
Message
If enabled, the PBX will playback the unreachable status message to the
caller if the callee cannot be reached.