Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 139
Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 138 of 303
Note:
Users need to have the same level as or higher level than an outbound
rule's privilege in order to make outbound calls from this rule.
Enable Voicemail
Enable Voicemail for the user. The default setting is "Yes".
SIP/IAX Password
Configure the SIP/IAX password for the users. Three options are
available to create password for the batch of extensions.
• User Random Password.
A random secure password will be automatically generated. It is
recommended to use this password for security purpose.
• Use Extension as Password.
• Enter a password to be used on all the extensions in the batch.
Voicemail Password
Configure Voicemail password (digits only) for the users.
• User Random Password.
A random password in digits will be automatically generated. It is
recommended to use this password for security purpose.
• Use Extension as Password.
• Enter a password to be used on all the extensions in the batch.
Ring Timeout
Configure the number of seconds to ring the user before the call is
forwarded to voicemail (voicemail is enabled) or hang up (voicemail is
disabled). If not specified, the default ring timeout is 60 seconds on the
UCM6100, which can be configured in the global ring timeout setting
under web GUI->Internal Options->IVR Prompt: General Preference.
The valid range is between 5 seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout
used is the shortest time set by either device.
Auto Record
Enable automatic recording for the calls using this extension. The default
setting is disabled. The recording files can be accessed under web
GUI->CDR->Recording Files.
Skip Voicemail Password
Verification
When user dials voicemail code, the password verification IVR is skipped.
If enabled, this would allow one-button voicemail access. By default this
option is disabled.
Music On Hold
Select which Music On Hold class to suggest to extensions when putting
them on hold.
Enable LDAP
If enabled, the batch added extensions will be added to LDAP Phonebook
PBX list; if disabled, the batch added extensions will be skipped when
creating LDAP Phonebook.
IAX Settings
Max Number of Calls
Configure the maximum number of calls allowed for each remote IP