Gasboy Site Controller III Start-Up - Manual (Page 96)

Start-up Commands
Page 84 MDE-4375 CFN Series Site Controller III Start-Up Manual · June 2005
3 Type AD SIG and press RETURN to add users who are authorized to use the console, PC or
remote terminal (
Figure 12-2 ).
Figure 12-2: Example of AD SIG Command with Prompts
4 Type LO DA and press RETURN to load the date and time into the system ( Figure 12-3 ).
Use military time.
Figure 12-3: Example of LO DA Command with Prompts
Receipt Header, Broadcast Messages
1 Type LO H;IC to load into the system the receipt heading and footing messages for the receipt
printer(s) (
Figure 12-4 ).
(For systems with optional receipt printer only).
If using Tokheim DPTs, contact GASBOY Technical Service for information.
Figure 12-4: Example of LO H;IC Command with Prompts
R* AD SIG
User number? 0
Permission level? 10
Sign on code? **********
R*
R* LO DA
Month? 8
Day of month? 23
Year? 05
Hour? 12
Minute? 31
Thu 8/23/05 12:31 PM, Trans = 57, Seq = 624 SCIII v3.0
R*
R* LO H;IC
Line number (0, 0X, 1X) ? 1
Heading line? CFN AUTOMATED SYSTEM
Line number (0, 0X, 1X) ? 2
Heading line? 24 HR. FUELING
Line number (0, 0X, 1X) ? 11
Footing line? THANK YOU
Line number (0, 0X, 1X) ? 12
Footing line? PLEASE COME AGAIN
Line number (0, 0X, 1X) ? 0
Form feed length? 5
Line number (0, 0X, 1X) ?
R*