3 – begin start-up form, Parts 1 through 6, Begin start-up form – Gasboy Site Controller III Start-Up User Manual
Page 37
MDE-4375 CFN Series Site Controller III Start-Up Manual · June 2005
Page 25
Begin Start-Up Form
3 – Begin Start-Up Form
Parts 1 through 6
This section covers Parts 1 through 6 of the Start-up form. Parts 7 through 13 are covered in
subsequent sections. See
“CFN System Start-up Form” on page Form-1
for a blank copy of the
Start-up forms.
1. SITE IDENTIFICATION
Customer:
The name of the company that owns the system.
Contact:
The name of the person who will manage the site operation.
Customer Phone:
The phone number where the contact person can be reached.
Site Location:
The address of the site where the system is located.
Electrician:
The name of the person who did the wiring for the site.
Date/Time of Arrival:
Date and time of your arrival at the site.
Date/Time of Departure:
Date and time you left the site.
Distributor/Phone:
The distributor involved with the sale of the system. Include phone number.
Installer/Phone:
The firm that installed the system. Include phone number
Start-up Person:
Your name.
Co. Name/Phone:
Your company name and phone number.
2. SYSTEM IDENTIFICATION
Site #:
Number of the site.
Checkmark the components that this site has.
Indicate the serial number, program version number for each of the following:
Site Controller III:
Site Controller III unit. Also indicate the program name and debug version.
PCU (s):
Serial number of pump control unit; program version from PCU CPU PCB.
If pedestal pump control unit, program version from PCU CPU PCB.
ICR (s):
Island Card Readers, program version from Reader CPU PCB.
Also indicate Y or N if the ICR has a receipt printer, has pedestal PCU, or is set up
as a car wash or gate controller.
Console:
Profit Point:
Current Loop Driver:
gilpump PC Driver:
(current loop replacement)
CRIND PC Driver:
(current loop replacement)
Standalone Receipt Printer:
PIN Pad:
Complete the following section only for Gasboy PC packages.
PC SOFTWARE:
if applicable, indicate the version number of the PC software assigned to this site.
PC Make and Model:
Indicate the make and model of the PC being used at this site.
DOS Version:
Indicate the DOS version that is running on the customer’s PC.
Note: The serial number for each system device can be found on the ID tag located on the outside cover of that
device.