Gasboy Site Controller III Start-Up User Manual
Page 38
Begin Start-Up Form
Page 26
MDE-4375 CFN Series Site Controller III Start-Up Manual · June 2005
3. SYSTEM DESCRIPTION
PUMP #:
Indicates the pump number.
HOSE #:
Indicates hose outlet number.
FUEL TYPE:
The type of fuel dispensed by that pump or dispenser (for example, No-Lead,
Regular, etc.).
FUEL CODE:
The product code number (1 or 2 digits) assigned to that fuel type.
PUMP MAKE:
The name of the manufacturer of the pump or dispenser.
MODEL #:
The model number of the pump or dispenser.
SERIAL #:
The serial number of the pump or dispenser.
RESET:
The type of reset used in the pump (Veeder-Root, Tokheim #77, etc.)
TYPE SUC/SUB:
The type of pump used to dispense the fuel. Submersible pump (SUB) located
in the tank or is it a suction pump (SUC) located in the pump housing? Circle
one.
PULSER RATE:
The pulser rate of the pulser used by that pump or dispenser (for example,
10:1, 100:1)
STARTER RELAY:
Is an external starter relay used to supply power to the pump? Circle Y for yes
or N for no.
4. COMMUNICATIONS
Data Terminal/Logger:
Circle the device or devices, if present, and indicate the make and model
number of the data terminal or logger and which port to which it is connected.
Port # Baud Rate
1:
Baud rate for port 1.
4:
Baud rate for port 4.
5:
Baud rate for port 5.
6:
Baud rate for port 6.
COM1:
Baud rate for COM1.
COM2:
Baud rate for COM2.
Loop 1:
2/4 wire.
Loop 2:
2/4 wire.
Short Haul Modem:
The make and model number of the short haul modem that is connected to the
system. If no short haul modems are used, indicate not applicable (N/A).
Phone Modem: Port
The make of the phone modem and the port to which it is connected. Remote
dial-in, not network.
Modem Phone #:
The area code and phone number for the external phone modem connected to
the system. If a modem is not used, indicate not applicable (N/A).
Network Name Port
The name of the network to which the site is connecting (if appliable) and the
port through which it is communicating.