Breaker numbers, System environment, Conduit – Gasboy Site Controller III Start-Up User Manual
Page 127: System power
![background image](https://www.manualsdir.com/files/787462/content/doc127.png)
MDE-4375 CFN Series Site Controller III Start-Up Manual · June 2005
Page Form-3
Gasboy Motor Fuel Management System
5. BREAKER NUMBERS
6. SYSTEM ENVIRONMENT
7. CONDUIT
8. SYSTEM POWER
Hose Brkr # Hose Brkr # Hose Brkr # Hose Brkr #
Power conditioner: 1. 9. 17. 25.
AC Surge Protector: 2. 10. 18. 26.
Islander: 3. 11. 19. 27.
PCU(s): 4. 12. 20. 28.
ICR(s): 5. 13. 21. 29.
FPR(s): 6. 14. 22. 30.
7. 15. 23. 31.
What components are on power conditioner? 8. 16. 24. 32.
What components are on AC surge protector?
Are all Gasboy components on same breaker? Y/N
Site Controller/Islander:
Console:
PCU(s):
ICR(s):
Profit Point(s):
FPRs:
All Metal Conduit? Y/N AC and DC in Separate Conduit? Y/N Wiring Neatness: Good/Fair/Bad
Is shielded cable (as specified in the Installation Manual) used? Y/N
If you answered NO to the above questions, contact Gasboy before proceeding.
Power Conditioner: Hot to Neutral VAC Hot to Ground VAC Neutral to Ground VAC
AC Surge Protector: Hot to Neutral VAC Hot to Ground VAC Neutral to Ground VAC
Islander: Hot to Neutral VAC Hot to Ground VAC Neutral to Ground VAC
PCU(s): Hot to Neutral VAC Hot to Ground VAC Neutral to Ground VAC
ICR(s): Hot to Neutral VAC Hot to Ground VAC Neutral to Ground VAC
FPR(s): Hot to Neutral VAC Hot to Ground VAC Neutral to Ground VAC
Grounding method: