Gasboy Site Controller III Start-Up - Manual (Page 102)

Start-up Commands
Page 90 MDE-4375 CFN Series Site Controller III Start-Up Manual · June 2005
Figure 12-20: Example of LO CR;IC Command with Prompts
4 If you are dialing out to a Network Controller, Site Controller III or remote host, type LO PH
to load the phone number (
Figure 12-21 ).
The system prompts MAIN or BACKUP; type M (or 1) or B (or 2) . If you are typing more
than two phone numbers (the Site Controller III can store up to six), type a number from 3 to 6
(3 and 4 store bank host phone numbers, 5 and 6 store auxiliary phone numbers). You will then
be prompted for the phone numbers. If you are typing more than the two CFN host phone
numbers, see the Site Manager’s Manual and the applicable Credit and Debit Card Networks
Manual for more information.
Figure 12-21: Example of LO PH Command with Prompts
Load Merchandise/Departments, Prices, Inventory
1 Type LO PRO;AC to load the system’s merchandise product codes, categories, names, and
pricing data (
Figure 12-22 ).
Figure 12-22: Example of LO PRO;AC Command with Prompts
2 Type LO IN;C to load inventory amounts and reorder levels for merchandise products ( Figure
12-23 ).
Note: LO IN automatically enables inventory tracking. For more information on inventory
tracking, see the Site Manager’s Manual.
R* LO CR;IC
Command number? 1
Command? ! CRASH
Command number?
R*
R* LO PH
Main (m) or Backup (b)? M
Phone number? 456-7890
R*
R* LO PRO;AC
Product code? 3
Category? 3
Product name? Soda
Minimum price? .01
Maximum price? 1.55
Taxes? 0
Product code?
R*