Gasboy Site Controller III Start-Up - Manual (Page 28)

Site Information
Page 16 MDE-4375 CFN Series Site Controller III Start-Up Manual · June 2005
20. Load Price Lookup
(Reference: Site Manager’s Manual, LO PLU command)
Use the following table to assign prices for merchandise products that do not have a minimum
or maximum price or as a default price for products that do.
21. Profit Point Product Layout
(Reference: Site Manager’s Manual, LO PRO command; Profit Point Reference Manual,
Prompts for PLU Fields)
Before configuring the Profit Point, your site controller should already be set up with the
following: products/departments, prices (fuels only), tanks, pumps, and taxes. You can
transfer this information directly to the Profit Point by using the POS.CMD command. This
will make it easier to enter your MASTER.PLU information on the Profit Point.
The MASTER.PLU file contains three types of data: department numbers, UPC codes, and
stock numbers. The charts on the following three pages will help you organize the information
for each product.
Notes on Form Entries
The following descriptions are abbreviated versions of the entries used in the three worksheets
that follow. See MDE-4356 Profit Point Reference Manual for detailed information on these
input requirements.
Dpt = department number corresponding to the site controller’s department (Prd). See Step
19. Will always be present for departments if POS.CMD has been run.
Grp = optional group number assigned to each product.
Vnd = up to 255 vendor numbers can be defined.
Description = description (name) of department or product. See Step 19. Will already be
present for departments if POS.CMD has been run.
Ceiling = corresponds to $MAX price on site controller. See Step 19. Will already be present
for departments if POS.CMD has been run.
Product # Price Product # Price