Gasboy Site Controller III Start-Up - Manual (Page 13)

MDE-4375 CFN Series Site Controller III Start-Up Manual · June 2005 Page 1
Starting a Site Controller III System
1 – Starting a Site Controller III System
Introduction
This Start-Up Manual is provided to assist you in the start-up of a GASBOY CFN Site
Controller III System. The CFN Series System is a computerized data acquisition system. As
the start-up person, you should already be familiar with all the CFN Site Controller III
manuals. Proper installation according to the CFN Site Controller III Installation Manual is
critical to ensure correct and trouble-free operation. The CFN Site Controller III System
includes a one year parts and labor warranty against defective material and/or workmanship.
See the Warranty page at the back of this book for details.
Note: Noncompliance with the specifications of the CFN Site Controller III Installation
Manual and the checks in the accompanying Start-up Form could void the warranty.
As you are performing the start-up process, any deviations from the specifications listed in the
Site Controller III Installation Manual should be corrected. If any tests fail, correct the wiring
or system problem and perform the test again. If you have any questions, cannot proceed to
the next step, or you want authorization for exceptions, please contact GASBOY Technical
Service at:
1-800-444-5529
In addition to this manual, the customer should have these additional GASBOY CFN Series
manuals:
• MDE-4298 Site Controller III Installation Manual, former C35880
Contains instructions, restrictions and guidelines for planning, laying out, and wiring the
Site Controller III System.
• MDE-4299 Profit Point Installation Manual, former C09156
Contains installation instructions for both the Profit Point Console and SC III/POS
workstation.
• MDE-4315 Site Controller III Site Manager's Manual, former C35920
Contains detailed instructions for setting up or maintaining the Site Controller III. It also
contains descriptions of system features, data terminal commands, transaction processing
and system maintenance.
Depending on the site configuration, the customer may also have these manuals:
• CFN Card Encoding Manual, C01687
Describes the cards, field descriptions, layouts, and filling out the card encoding form.
Covers both encoding of mag cards and punching of optical cards.
• Debit and Credit Card Networks Manuals
Each manual describes one of the various network interfaces for the Site Controller III.