Gasboy Site Controller III Start-Up - Manual (Page 20)

Site Information
Page 8 MDE-4375 CFN Series Site Controller III Start-Up Manual · June 2005
4. Broadcast Messages
(Reference: Site Manager’s Manual: LO ME command)
5. Load Product - Fuels
(Reference: Site Manager’s Manual, LO PRO command)
Use the following table to list the site's fuel products. Use one product code for each different
fuel product. These product codes can be linked to authorization codes when used with
private-issue cards. They are also used to assign products to tanks and pumps. In addition to
the product code, category, and name, three other prompts appear when you execute this
command: minimum price, maximum price, and tax. These should all be set to zero for fuel
products. If you need additional space, photocopy this chart.
Note: Fuel categories are usually 1 or 1 and 2.
Broadcast Message
(20 characters maximum)
Display Time in Seconds Message # 1.
Display Time in Seconds Message # 2.
Display Time in Seconds Message # 3.
Display Time in Seconds Message # 4.
Display Time in Seconds Message # 5.
Display Time in Seconds Message # 6.
Display Time in Seconds Message # 7.
Display Time in Seconds Message # 8.
Display Time in Seconds Message # 9.
Display Time in Seconds Message # 10.
Product Code Product Category Product Name