Gasboy Site Controller III Start-Up - Manual (Page 68)

Component Power-Up and Configuration
Page 56 MDE-4375 CFN Series Site Controller III Start-Up Manual · June 2005
Configuring the Profit Point Console
Access the Main Menu from Profit Point Console
1 Turn the Manager’s key to MGR position.
2 Sign on (if required).
3 Press SPEC FUNC, 0 and ENTER. The Main Menu displays.
Note: To return to POS mode, select 1 on the Main Menu and press ENTER.
Access the Main Menu from SC III/POS WS
1 Minimize the SC III window and double-click on the PP icon
2 Sign on (if required).
3 Press SPEC FUNC, 0 and ENTER. The Main Menu displays.
Note: To return to POS mode, select 1 on the Main Menu and press ENTER.
4 On the Profit Point Main Menu, press 4 (or C) and ENTER. This displays the Configuration
Menu
5 Select configuration options by selecting the number or first letter of the option and pressing
ENTER.
Note: The options are 1: Software, 2: Hardware, 3: Keyboard, and 4: Setup config.pos file.
Software Configuration
Type 1 (or S) and press ENTER to display the Software Configuration menu.
When you select an entry, a submenu appears allowing you to select the desired options for
that entry. The entries are:
1 Training mode off-hook rate Enter a value from 1 (slowest) to 9 (fastest)
2 Show change as coins and bills Shows yes to show change, or no
3 Minimum age to buy ask-ID items Shows one or two ID ages, depending on selections
4 Product totals kept in PLU file Shows yes to update product totals, or no
5 Keep file of missing items Shows yes to keep a file, or no
6 Off-hook beep rate Enter a value (15 seconds, standard) for length of time between 3
beep signals indicating pump is off-hook
7 Validate checks Prints date, time, register number, clerk number, and amount
tendered on checks accepted
8 Enter birthdate when ID required Select 1 for require; select 2 for do not require
9 Head Clerk signon Enter user ID and password for head clerk. Used for keyswitch
position 2 when 5-position keyswitch is used.