Gasboy Site Controller III Start-Up - Manual (Page 49)

MDE-4375 CFN Series Site Controller III Start-Up Manual · June 2005 Page 37
Jumpers & Switch Settings
Site Controller Memory I/O Board
Figure 5-2: SC III Memory I/O Board
Jumpers
Switches, S1 and S2
Switch S1
Jumper Function Setting
K1 Date/Time Clock Speed 1 - 2 for 4 wait state; default
2 - 3 for 1 wait state
K2 Enable A19 to RAM 2 - 3 for 128Kx8; default
1 - 2 for 512Kx8
K3 RAM Size 2 - 3 for 128Kx8; default
1 - 2 for 512Kx8
K5 Tokheim Reset Output Not used
Switch Function Setting
S1-1 Boot to monitor after reset Open
Boot to OS after reset; default Closed
S1-2 Debug mode Open
Normal; default Closed
S1-3 Do not talk to PC while in monitor Open
Monitor I/O goes to PC also; default Closed
S1-4 Monitor I/O goes to SC port 1 also Open
No monitor I/O to SC port 1; default Closed