Gasboy Site Controller III Start-Up - Manual (Page 24)

Site Information
Page 12 MDE-4375 CFN Series Site Controller III Start-Up Manual · June 2005
10. Load Pumps
(Reference: Site Manager’s Manual, LO PU command)
Fill in the pump number, hose number (1 to 5 for each pump), the reading from the quantity
totalizer and the reading from the dollar totalizer, if applicable.
Note: Quantity and $Amount are optional. Leave as 0 (zero) if desired. If you need more
space, photocopy this table.
11. Load Cutoff
(Reference: Site Manager’s Manual, LO CU command)
Use this table to note the amount the Site Controller will authorize or request authorization for
when a customer requests a FILL. When you encode a limitation code on privately-issued
cards, that code overrides the pump fill limit. Also indicate on this table, the slow cutoff point,
at which the pump will slow prior to reaching the fill limit.
Pump Hose Quantity $Amount Pump Hose Quantity $Amount
Pump Number Fill Limit Slow Cutoff