Gasboy Site Controller III Start-Up - Manual (Page 105)

MDE-4375 CFN Series Site Controller III Start-Up Manual · June 2005 Page 93
Start-up Commands
3 If you wish to load a shift other than shift one, type LO SH to load the current shift ( Figure 12-
32 ).
Type the shift number at the prompt.
If using the Shift Change package, use NEXTDAY command to load the first shift.
Figure 12-32: Example of LO SH Command with Prompt
Optional Features
1 If you use the allocation feature, type REM AL;A to initialize the totalizer file ( Figure 12-33 ).
This erases the entire file and frees all cards from allocation.
Figure 12-33: Example of REM AL;A Command
2 Type LO AL;C to assign allocation amounts to allocation numbers ( Figure 12-34 ).
Note: If the number in AMOUNT? is preceded by a dollar sign, the value is in dollars ($250
allocation in the first example). If the AMOUNT? is typed alone, the value is assumed to
be gallons (120 gallons in the second example).
Figure 12-34: Example of LO AL;C Command with Prompts
3 If you use the MPG option, type LO V;IC to clear the vehicle file and load vehicles and
odometer readings (
Figure 12-35 ).
R* LO SH
Shift number? 1
R*
R* REM AL;A
R*
R* LO AL;C
Allocation no.? 123
Amount? $250.00
Allocation no.? 300-310
Amount? 120.00
Allocation no.?
R*