Basler Electric BE1-11t - Manual (Page 468)

456 9424200995 Rev H
IEEE Std C37.90.2-2004 - IEEE Standard Withstand Capability of Relay Systems to Radiated
Electromagnetic Interference from Transceivers
IEEE Std C37.90.3-2001 - IEEE Standard Electrostatic Discharge Test for Protective Relays
CE Compliance
This product has been evaluated and complies with the relevant essential requirements set forth by the
EU legislation.
EC Directives:
•
LVD 2006/95/EC
•
EMC 2004/108/EC
Harmonized standards used for evaluation:
•
EN 50178 – Electronic Equipment for use in Power Installations
•
EN 61000-6-2 – Electromagnetic Compatibility (EMC), Generic Standards, Immunity for Industrial
Environments
•
EN 61000-6-4 – Electromagnetic Compatibility (EMC), Generic Standards, Emission Standard for
Industrial Environments
UL Recognition
This product is recognized to applicable U.S. and Canadian safety standards and requirements by UL.
Standard used for evaluation:
•
UL 508
UL Recognition for Style xxxxxxxxxxxCxx
This product is recognized to applicable U.S. and Canadian safety standards and requirements by UL.
Evaluation to Class 1, Div 2, Groups A, B, C, and D, Temperature Code T4 for Hazardous Location
Service. Suitable for use in Class 1, Division 2, Groups A, B, C, and D hazardous locations only.
Standards used for evaluation:
•
UL 508
•
ISA 12.12.01
•
CSA C22.2 No. 213-M1987
Warning! - EXPLOSION HAZARD
Do not disconnect equipment unless power has been switched off or
the area is known to be non-hazardous.
Substitution of components may impair suitability for Class 1,
Division 2.
Do not engage USB unless power has been switched off or the area is
known to be non-hazardous.
CSA Certification
This product was tested and has met the certification requirements for industrial control equipment.
Standards used for evaluation:
•
CSA C22.2 No. 14
GOST-R Certification
GOST-R certified per the relevant standards of Gosstandart of Russia.
Specifications BE1-11t