Basler Electric BE1-851 Modbus Protocol User Manual
Instruction manual
This manual is related to the following products:
Table of contents
Document Outline
- COVER
- CONTENTS
- REVISION HISTORY
- GENERAL INFORMATION
- INTRODUCTION
- FUNCTIONAL DESCRIPTION
- COMMUNICATIONS HARDWARE REQUIREMENTS
- DETAILED MESSAGE QUERY AND RESPONSE
- DATA FORMATS
- Floating Point Data Format (FP)
- Double Precision Data Format (DP)
- Long Integer Data Format (LI)
- Integer Data Format (INT)
- Short Integer Data Format (SI)
- ASCII Character Data Format (ASC (1))
- ASCII String Data Format (ASC (x))
- Bit Mapped Data Format (BM (x))
- CRC Error Check
- Session Access Registers
- Template Registers
- Fault Summary Registers
- Report Generation Registers
- Contiguous Poll Block Registers
- Exception Code Enhancement Registers
- REGISTER TABLE
- MAPPING BE1-851 PARAMETERS INTO MODICON HOLDING REGISTER ADDRESS SPACE
- RESISTER TABLE - ORDERED BY REGISTER NUMBER
- Holding Read/Write Data Register Parameter Supported Format Notes
- Session Parameters
- Template Parameters
- Global Parameters
- Control Parameters
- Holding Read/Write Data Register Parameter Supported Format Notes
- Group Setting Parameters
- Global Setting Parameters
- Holding Read/Write Data Register Parameter Supported Format Notes
- Contiguous Poll Block
- Setting Group Control
- Serial Port Setting Parameters
- Holding Read/Write Data Register Parameter Supported Format Notes
- System Data Setting Parameters
- Breaker Duty Setting Parameters
- Relay Data Setting Parameters
- Holding Read/Write Data Register Parameter Supported Format Notes
- Custom Logic Setting Parameters
- Holding Read/Write Data Register Parameter Supported Format Notes
- Holding Read/Write Data Register Parameter Supported Format Notes
- Holding Read/Write Data Register Parameter Supported Format Notes
- Holding Read/Write Data Register Parameter Supported Format Notes
- Holding Read/Write Data Register Parameter Supported Format Notes
- System Labels and ID Setting Parameters
- Holding Read/Write Data Register Parameter Supported Format Notes
- Holding Read/Write Data Register Parameter Supported Format Notes
- Legacy: Product Information
- Legacy: Time and Date
- Legacy: Breaker Duty
- Legacy: Select Before Operate (SBO) and Control Commands
- Legacy: Metering - Primary Parameters
- Legacy: Reporting
- Holding Read/Write Data Register Parameter Supported Format Notes
- Holding Read/Write Data Register Parameter Supported Format Notes
- Report Parameters
- Holding Read/Write Data Register Parameter Supported Format Notes
- Fault Template (FLT)
- Holding Read/Write Data Register Parameter Supported Format Notes
- Report Template (RPT)
- Metering Parameters
- Holding Read/Write Data Register Parameter Supported Format Notes
- REGISTER DETAILS
- INTRODUCTION
- Logic Settings
- Session Parameters
- Template Parameters
- Global Parameters
- Control Parameters
- Group Setting Parameters
- Global Settings Parameters
- Serial Port Setting Parameters
- System Data Setting Parameters
- Breaker Duty Setting Parameters
- Relay Data Setting Parameters
- Custom Logic Setting Parameters
- System Labels and ID Setting Parameters
- Report Parameters
- Fault Template (FLT)
- Report Template (RPT)
- Metering Parameters
- INTRODUCTION
- ASCII CROSS REFERENCE
- Back Cover.pdf