Basler Electric BE1-11t - Manual (Page 266)

254 9424200995 Rev H
files. Refer to Figure 199. For information on Settings Files management, refer the BESTCOMSPlus
Software chapter.
Figure 199. BESTlogicPlus Programmable Logic Toolbar
Saving a BESTlogic
™Plus File
After programming BESTlogicPlus settings, click on the Save button to save the settings to memory.
Before the new BESTlogicPlus settings can be uploaded to the BE1-11t, you must select Save from the
File pull-down menu located at the top of the BESTCOMSPlus main shell. This step will save both the
BESTlogicPlus settings and the operating settings to a file.
The user also has the option to save the BESTlogicPlus settings to a unique file that contains only
BESTlogicPlus settings. Click on the Logic Library drop-down button and select Save Logic Library File.
Use normal Windows
® techniques to browse to the folder where you want to save the file and enter a
filename to save as.
Opening a BESTlogic
™Plus File
To open a saved BESTlogicPlus file, click on the Logic Library drop-down button on the BESTlogicPlus
Programmable Logic toolbar and select Open Logic Library File. Use normal Windows techniques to
browse to the folder where the file is located.
Protecting a BESTlogic
™Plus File
Objects in a logic diagram can be locked so that when the logic document is protected these objects
cannot be changed. Locking and protecting is useful when sending logic files to other personnel to be
modified. The locked object(s) cannot be changed. To view the lock status of the object(s), select Show
Lock Status from the Protection drop-down menu. To lock object(s), use the mouse to select object(s) to
be locked. Right click on the selected object(s) and select Lock Object(s). The gold colored padlock next
to the object(s) will change from an open to a locked state. To protect a logic document, select Protect
Logic Document from the Protection drop-down button. A password is optional.
Uploading a BESTlogic
™Plus File
To upload a BESTlogicPlus file to the BE1-11t, you must first open the file through BESTCOMSPlus or
create the file using BESTCOMSPlus. Then pull down the Communication menu and select Upload Logic
to Device.
Downloading a BESTlogic
™Plus File
To download a BESTlogicPlus file from the BE1-11t, you must pull down the Communication menu and
select Download Settings and Logic from Device. If the logic in your BESTCOMSPlus has changed, a
dialog box will open asking you if want to save the current logic changes. You can choose Yes or No.
After you have taken the required action to save or not save the current logic, the downloading is
executed.
Printing a BESTlogic
™Plus File
To view a preview of the printout, click on the Print Preview icon located on the BESTlogicPlus
Programmable Logic toolbar. If you wish to print, select the printer icon in the upper left corner of the Print
Preview screen.
You can skip the print preview and go directly to print by clicking on the Printer icon on the BESTlogicPlus
Programmable Logic toolbar. A dialog box, Select Views to Print opens allowing you to check which views
you would like to print. Next, the Print dialog box opens with the typical Windows choice to setup the
properties of printer. Execute this command, as necessary, and then select Print.
BESTlogic
™Plus
BE1-11t