Interlogix NS3550-2T-8S User Manual - Manual (Page 85)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
85
4.2.15 SMTP Configuration
Configuring SMTP Configuration on this page
The SMTP Configuration screen in Figure 4-2-18 appears.
Figure 4-2-18: SMTP Configuration
The page includes the following fields:
Object Description
• SMTP Mode
Enabled
It is for you to enable SMTP mode function. This mode offers you to configure
SMTP server and SMTP account information, system will refer it to send an E-mail
for alarm noticing
• SMTP Server It is for you to set up a specified SMTP server DNS name or IP address. If a
DNS name is inputted; please remember to input DNS server IP address on the IP
configuration page.
• SMTP Port It is for you to input the SMTP server port number. The default is "25".
• SMTP Authentication
Enabled
As usual SMTP server is denied to relay a mail from a different domain, so you
have to enable this option and input your mail account and password for SMTP
sever authorizing to forward a mail from a different domain.
For example, you want an SMTP server, which is located on mail.123.com, to
send a mail to mail.456.net.com.
If you want to send the mail to a SMTP server which is located on the same
domain or the same SMTP server, you don't have to enable SMTP authentication.
• Authentic User Name
It is for you to input your mail account name.
• Authentication
Password
It is for you to input your mail account password.
• E-mail From It is for you to input who send this mail.
• E-mail Subject
It is for you to input mail subject.