Interlogix NS3550-2T-8S User Manual User Manual
Page 166
IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
166
The page includes the following fields:
MSTI Port Configuration
Object
Description
• Select MSTI
Select the bridge instance and set more detail configuration.
Figure 4-7-10: MST1 MSTI Port Configuration Page Screenshot
The page includes the following fields:
MSTx MSTI Port Configuration
Object
Description
• Port
The switch port number of the corresponding STP CIST (and MSTI) port.
• Path Cost
The Configuration All with available values will assign to whole items.
Controls the path cost incurred by the port. The Auto setting will set the path cost
as appropriate by the physical link speed, using the 802.1D recommended
values. Using the Specific setting, a user-defined value can be entered. The path
cost is used when establishing the active topology of the network. Lower path cost
ports are chosen as forwarding ports in favor of higher path cost ports. Valid
values are in the range 1 to 200000000. All means all ports will have one specific
setting.