Lldp med port policy, Lldp med coordinates – Interlogix NS3550-2T-8S User Manual User Manual
Page 493

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
493
video_conferencing : Video Conferencing for use by dedicated Video Conferencing equipment and other similar
appliances supporting real-time interactive video/audio services.
streaming_video : Streaming Video for use by broadcast or multicast based video content distribution and other similar
applications supporting streaming video services that require specific network policy treatment.
Video applications relying on TCP with buffering would not be an intended use of this application
type.
video_signaling : Video Signaling (conditional) for use in network topologies that require a separate policy for the
video signaling than for the video media.
tagged : The device is using tagged frames
unragged : The device is using untagged frames
application type as defined in IETF RFC 2474 [5]. This 6 bit field may contain one of 64 code point values
(0 through 63). A value of 0 represents use of the default DSCP value as defined in RFC 2475.
LLDP MED Port Policy
Description:
Set or show LLDP-MED port polcies.
Syntax:
LLDPMED port policies [
Parameters:
LLDP MED Coordinates
Description:
Set or show LLDP-MED Location.
Syntax:
LLDPMED Coordinates [latitude|longitude|altitude] [north|south|west|east|meters|floor] [coordinate_value]
Parameters:
latitude : Latitude, 0 to 90 degress with max. 4 digits (Positive numbers are north of the equator and negative numbers
are south of the equator).
longitude : Longitude,0 to 180 degress with max. 4 digits (Positive values are East of the prime meridian and negative
numbers are West of the prime meridian.