Qos storm multicast, Qos storm broadcast – Interlogix NS3550-2T-8S User Manual User Manual
Page 538

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
538
Parameters:
enable : Enable unicast storm control
disable : Disable unicast storm control
Default Setting:
disable
Example:
Enable unicast storm control in 2fps
NS3552-8P-2S:/> QoS Storm Unicast enable 2
QoS Storm Multicast
Description:
Set or show the multicast storm rate limiter.
Syntax:
QoS Storm Multicast [enable|disable] [
Parameters:
enable : Enable multicast storm control
disable : Disable multicast storm control
Default Setting:
disable
Example:
Enable multicast storm control in 2fps
NS3552-8P-2S:/> QoS Storm multicast enable 2
QoS Storm Broadcast
Description:
Set or show the broadcast storm rate limiter. The limiter will only affect flooded frames, i.e. frames with a (VLAN ID, DMAC)
pair not present in the MAC Address table.