Interlogix NS3550-2T-8S User Manual - Manual (Page 321)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
321

Power over Ethernet Schedule Configuration
This page allows the user to define PoE schedule. The screen in Figure 4-16-5 appears.
Figure 4-16-5: PoE Schedule Screenshot
Please press Add New Rule button to start set PoE Schedule function. You have to set PoE schedule to profile, then go back to
PoE Port Configuration, and select “Schedule” mode from per port “PoE Mode” option. Then you can indicate which schedule
profile could be applied to the PoE port.
The page includes the following fields:
Object Description
• Profile Set the schedule profile mode. Possible profiles are:
Profile1
Profile2
Profile3
Profile4
• Week Day Allows user to set week day for defining PoE function, which should be enabled on
the day.
• Start Hour Allows user to set at what hour that best enables PoE function.
• Start Min Allows user to set at what minute that best enables PoE function.
• End Hour Allows user to set at what hour that best disables PoE function.
• End Min Allows user to set at what minute that best disables PoE function.
• Reboot Enable Allows user to enable or disable whole PoE port reboot by PoE reboot schedule.
Please be noted that if you want PoE schedule and PoE reboot schedule to work at
the same time, please use this function, and don’t use Reboot Only function.
This function offers administrator to reboot PoE device at an indicated time if
administrator has this kind of requirement.