Interlogix NS3550-2T-8S User Manual - Manual (Page 226)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
226
• IP Protocol Value
When "Specific" is selected for the IP protocol value, you can enter a specific
value. The allowed range is 0 to 255. A frame that hits this ACE matches this IP
protocol value.
• IP TTL Specify the Time-to-Live settings for this ACE.

zero: IPv4 frames with a Time-to-Live field greater than zero must not
be able to match this entry.

non-zero: IPv4 frames with a Time-to-Live field greater than zero must
be able to match this entry.

Any: Any value is allowed ("don't-care").
• IP Fragment Specify the fragment offset settings for this ACE. This involves the settings for the
More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an
IPv4 frame.

No: IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must not be able to match this entry.

Yes: IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must be able to match this entry.

Any: Any value is allowed ("don't-care").
• IP Option Specify the options flag setting for this ACE.

No: IPv4 frames where the options flag is set must not be able to match
this entry.

Yes: IPv4 frames where the options flag is set must be able to match
this entry.

Any: Any value is allowed ("don't-care").
• SIP Filter Specify the source IP filter for this ACE.

Any: No source IP filter is specified. (Source IP filter is "don't-care".)

Host: Source IP filter is set to Host. Specify the source IP address in the
SIP Address field that appears.

Network: Source IP filter is set to Network. Specify the source IP
address and source IP mask in the SIP Address and SIP Mask fields
that appear.
• SIP Address When "Host" or "Network" is selected for the source IP filter, you can enter a
specific SIP address in dotted decimal notation.
• SIP Mask
When "Network" is selected for the source IP filter, you can enter a specific SIP
mask in dotted decimal notation.
• DIP Filter
Specify the destination IP filter for this ACE.

Any: No destination IP filter is specified. (Destination IP filter is
"don't-care".)

Host: Destination IP filter is set to Host. Specify the destination IP
address in the DIP Address field that appears.

Network: Destination IP filter is set to Network. Specify the destination
IP address and destination IP mask in the DIP Address and DIP Mask
fields that appear.
• DIP Address When "Host" or "Network" is selected for the destination IP filter, you can enter a
specific DIP address in dotted decimal notation.
• DIP Mask When "Network" is selected for the destination IP filter, you can enter a specific
DIP mask in dotted decimal notation.
 ICMP Parameters
Object Description
•
ICMP Type Filter Specify the ICMP filter for this ACE.

Any: No ICMP filter is specified (ICMP filter status is "don't-care").

Specific: If you want to filter a specific ICMP filter with this ACE, you
can enter a specific ICMP value. A field for entering an ICMP value
appears.
•
ICMP Type Value When "Specific" is selected for the ICMP filter, you can enter a specific ICMP
value. The allowed range is 0 to 255. A frame that hits this ACE matches this
ICMP value.
•
ICMP Code Filter Specify the ICMP code filter for this ACE.

Any: No ICMP code filter is specified (ICMP code filter status is
"don't-care").

Specific: If you want to filter a specific ICMP code filter with this ACE,
you can enter a specific ICMP code value. A field for entering an ICMP
code value appears.