Security network nas radius_qos – Interlogix NS3550-2T-8S User Manual User Manual
Page 438

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
438
Time in seconds before a MAC-address that failed authentication gets a new authentication chance.
Syntax:
Security Network NAS Holdtime [
Parameters:
(default: Show current hold time)
Default Setting:
10
Example:
Set NAS hold time in 100sec
NS3552-8P-2S:/>security network nas holdtime 100
Security Network NAS RADIUS_QoS
Description:
Set or show either global enabledness (use the global keyword) or per-port enabledness of RADIUS-assigned QoS.
Syntax:
Security Network NAS RADIUS_QoS [global|
Parameters:
global : Select the global RADIUS-assigned QoS setting
(default: Show current per-port RADIUS-assigned QoS enabledness)
enable : Enable RADIUS-assigned QoS either globally or on one or more ports
disable: Disable RADIUS-assigned QoS either globally or on one or more ports
(default: Show current RADIUS-assigned QoS enabledness)
Default Setting:
disable
Example:
Enable NAS RADIUS QoS
NS3552-8P-2S:/>security network nas radius_qos enable