Interlogix NS3550-2T-8S User Manual - Manual (Page 327)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
327
Port Configuration:
Object Description
•
Port The switch port number of the port.
•
Enable Controls whether loop protection is enabled on this switch port.
• Action
Configures the action performed when a loop is detected on a port. Valid values
are Shutdown Port, Shutdown Port and Log or Log Only.
• Tx Mode
Controls whether the port is actively generating loop protection PDU's, or whether
it is just passively looking for looped PDU's.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.17.2 Status
This page displays the loop protection port status the ports from the Industrial Managed Switch.
Figure 4-17-2: Loop Protection Status Page Screenshot
The page includes the following fields:
Object Description
•
Port The switch port number of the logical port.
•
Action The currently configured port action.
• Transmit
The currently configured port transmit mode.
• Loops
The number of loops detected on this port.
• Status
The current loop protection status of the port.
• Loop
Whether a loop is currently detected on the port.
• Time of Last Loop
The time of the last loop event detected.