Interlogix NS3550-2T-8S User Manual - Manual (Page 367)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
367
IPv6 AUTOCINFIG
Description:
Set or show the IPv6 AUTOCONFIG mode.
Syntax:
IP IPv6 AUTOCONFIG [enable|disable]
Parameters:
enable : Enable IPv6 AUTOCONFIG mode
disable: Disable IPv6 AUTOCONFIG mode
Default Setting:
disable
Example:
Enable IPv6 autoconfig function:
NS3552-8P-2S:/>ip ipv6 autoconfig enable
IPv6 Setup
Description:
Set or show the IPv6 setup.
Syntax:
IP IPv6 Setup [] [] []
Parameters:
: IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:). For example, four hexadecimal digits with a colon separates each field (:). For
example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand
way of representing multiple 16-bit groups of contiguous zeros; but it can only appear once. It also used a
following legally IPv4 address. For example,'::192.1.2.34'.
: IPv6 subnet mask , default: Show IPv6 prefix
: IPv6 router , default: Show IPv6 router. IPv6 address is in 128-bit records represented as eight fields of up
to four hexadecimal digits with a colon separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'.
The symbol '::' is a special syntax that can be used as a shorthand way of representing multiple 16-bit
groups of contiguous zeros; but it can only appear once. It also used a following legally IPv4 address. For
example,'::192.1.2.34'.