Interlogix NS3550-2T-8S User Manual - Manual (Page 572)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
572
enable : Enable Loop Protection
disable: Disable Loop Protection
Loop Protect Port Action
Description:
Set or show the Loop Protection port action.
Syntax:
Loop Protect Port Action [] [shutdown|shut_log|log]
Parameters:
: Port list or 'all', default: All ports
shutdown : Shutdown the port
shut_log : Shutdown the port and Log event
log : (Only) Log the event
Loop Protect Port Transmit
Description:
Set or show the Loop Protection port transmit mode.
Syntax:
Loop Protect Port Transmit [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable Loop Protection
disable: Disable Loop Protection
Loop Protect Status
Description:
Show the Loop Protection status.
Syntax:
Loop Protect Status []