Interlogix NS3550-2T-8S User Manual - Manual (Page 56)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
56
3.3 CLI Mode Management
There are two ways for CLI mode management, one is remote telnet, and the other is operating from console port. Remote telnet
is an IP-based protocol, and console port is for user to operate the Industrial Managed Switch on local only; however their
operation is the same.
The command line user interface is for performing system administration, such as displaying statistics or changing option settings.
Using this method, you can access the Industrial Managed Switch remote telnet interface from personal computer or
workstation in the same Ethernet environment as long as you know the current IP address of the Industrial Managed Switch.
Figure 3-1: Remote Telnet and Console Port Interface Management
In Windows system, you may click “Start” and then choose “Acessories” and “Command Prompt”. Please input “telnet
192.168.0.100” and press “enter’ from your keyboard. The following screen (see Figure 3-2) will appear.