Interlogix NS3550-2T-8S User Manual - Manual (Page 253)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
253
(zero), the default port (1813) is used on the RADIUS Accounting Server.
• Secret
The secret - up to 29 characters long - shared between the RADIUS Accounting
Server and the switch.
TACACS+ Authentication Server Configuration
The table has one row for each TACACS+ Authentication Server and a number of columns, which are:
Object Description
• #
The TACACS+ Authentication Server number for which the configuration below
applies.
• Enabled Enable the TACACS+ Authentication Server by checking this box.
• IP Address/Hostname The IP address or hostname of the TACACS+ Authentication Server. IP address is
expressed in dotted decimal notation.
• Port
The TCP port to use on the TACACS+ Authentication Server. If the port is set to 0
(zero), the default port (49) is used on the TACACS+ Authentication Server.
• Secret The secret - up to 29 characters long - shared between the TACACS+
Authentication Server and the switch.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.11.7 RADIUS Overview
This page provides an overview of the status of the RADIUS servers configurable on the Authentication configuration page. The
RADIUS Authentication/Accounting Server Overview screen in Figure 4-11-8 appears.