Interlogix NS3550-2T-8S User Manual - Manual (Page 570)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
570
Parameters:
: protection group id 1 - 64
statistics|clear: ERPS statistics
6.27 Loop Protect Command
Loop Protect Configuration
Description:
Show Loop Protection configuration.
Syntax:
Loop Protect Configuration
Loop Protect Mode
Description:
Set or show the Loop Protection mode.
Syntax:
Loop Protect Mode [enable|disable]
Parameters:
enable : Enable Loop Protection
disable: Disable Loop Protection
Default Setting:
enable
Loop Protect Transmit
Description:
Set or show the Loop Protection transmit interval.
Syntax:
Loop Protect Transmit []
Parameters:
Transmit time interval (1-10 seconds)