Interlogix NS3550-2T-8S User Manual - Manual (Page 149)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
149
Buttons
: Click to add a new entry in mapping table.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
4.6.14 Protocol-based VLAN Membership
This page allows you to map an already configured Group Name to a VLAN for the switch. The Group Name to VLAN Mapping
Table screen in Figure 4-6-20 appears.
Figure 4-6-20: Group Name to VLAN Mapping Table Page Screenshot
The page includes the following fields:
Object Description
• Delete To delete a Group Name to VLAN map entry, check this box. The entry will be
deleted on the switch during the next Save
• Group Name A valid Group Name is a string of almost 16 characters which consists of a
combination of alphabets (a-z or A-Z) and integers (0-9), no special character is
allowed. Whichever Group name you try mapping to a VLAN must be present in
Protocol to Group mapping table and must not be preused by any other existing
mapping entry on this page.
• VLAN ID Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges
from 1-4095.
• Port Members A row of check boxes for each port is displayed for each Group Name to VLAN ID
mapping. To include a port in a mapping, check the box. To remove or exclude the
port from the mapping, make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.
Buttons
: Click to add a new entry in mapping table.